ASTM TEST

2015년 2월 28일 토요일

NFPA Code 목록

NFPA 1 Fire Code
NFPA 2 Hydrogen Technologies Code
NFPA 3 Recommended Practice for Commissioning of Fire Protection and Life Safety Systems
NFPA 4 Standard for Integrated Fire Protection and Life Safety System Testing
NFPA 10 Standard for Portable Fire Extinguishers
NFPA 11 Standard for Low-, Medium-, and High-Expansion Foam
NFPA 11A Standard for Medium- and High-Expansion Foam Systems
NFPA 11C Standard for Mobile Foam Apparatus
NFPA 12 Standard on Carbon Dioxide Extinguishing Systems
NFPA 12A Standard on Halon 1301 Fire Extinguishing Systems
NFPA 13 Standard for the Installation of Sprinkler Systems
NFPA 13D Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
NFPA 13E Recommended Practice for Fire Department Operations in Properties Protected by Sprinkler and Standpipe Systems
NFPA 13R Standard for the Installation of Sprinkler Systems in Low-Rise Residential Occupancies
NFPA 14 Standard for the Installation of Standpipe and Hose Systems
NFPA 15 Standard for Water Spray Fixed Systems for Fire Protection
NFPA 16 Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems
NFPA 17 Standard for Dry Chemical Extinguishing Systems
NFPA 17A Standard for Wet Chemical Extinguishing Systems
NFPA 18 Standard on Wetting Agents
NFPA 18A Standard on Water Additives for Fire Control and Vapor Mitigation
NFPA 20 Standard for the Installation of Stationary Pumps for Fire Protection
NFPA 22 Standard for Water Tanks for Private Fire Protection
NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances
NFPA 25 Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems
NFPA 30 Flammable and Combustible Liquids Code
NFPA 30A Code for Motor Fuel Dispensing Facilities and Repair Garages
NFPA 30B Code for the Manufacture and Storage of Aerosol Products
NFPA 31 Standard for the Installation of Oil-Burning Equipment
NFPA 32 Standard for Drycleaning Plants
NFPA 33 Standard for Spray Application Using Flammable or Combustible Materials
NFPA 34 Standard for Dipping, Coating, and Printing Processes Using Flammable or Combustible Liquids
NFPA 35 Standard for the Manufacture of Organic Coatings
NFPA 36 Standard for Solvent Extraction Plants
NFPA 37 Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines
NFPA 40 Standard for the Storage and Handling of Cellulose Nitrate Film
NFPA 42 Code for the Storage of Pyroxylin Plastic
NFPA 45 Standard on Fire Protection for Laboratories Using Chemicals
NFPA 46 Recommended Safe Practice for Storage of Forest Products
NFPA 50 Standard for Bulk Oxygen Systems at Consumer Sites
NFPA 50A Standard for Gaseous Hydrogen Systems at Consumer Sites
NFPA 50B Standard for Liquefied Hydrogen Systems at Consumer Sites
NFPA 51 Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes
NFPA 51A Standard for Acetylene Cylinder Charging Plants
NFPA 51B Standard for Fire Prevention During Welding, Cutting, and Other Hot Work
NFPA 52 Vehicular Gaseous Fuel Systems Code
NFPA 53 Recommended Practice on Materials, Equipment, and Systems Used in Oxygen-Enriched Atmospheres
NFPA 54 National Fuel Gas Code
NFPA 55 Compressed Gases and Cryogenic Fluids Code
NFPA 56 Standard for Fire and Explosion Prevention During Cleaning and Purging of Flammable Gas Piping Systems
NFPA 57 Liquefied Natural Gas (LNG) Vehicular Fuel Systems Code
NFPA 58 Liquefied Petroleum Gas Code
NFPA 59 Utility LP-Gas Plant Code
NFPA 59A Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG)
NFPA 61 Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities
NFPA 67 Guide on Explosion Protection for Gaseous Mixtures in Pipe Systems
NFPA 68 Standard on Explosion Protection by Deflagration Venting
NFPA 69 Standard on Explosion Prevention Systems
NFPA 70 National Electrical Code
NFPA 70A National Electrical Code Requirements for One- and Two-Family Dwellings
NFPA 70B Recommended Practice for Electrical Equipment Maintenance
NFPA 70E Standard for Electrical Safety in the Workplace
NFPA 72 National Fire Alarm and Signaling Code
NFPA 73 Standard for Electrical Inspections for Existing Dwellings
NFPA 75 Standard for the Fire Protection of Information Technology Equipment
NFPA 76 Standard for the Fire Protection of Telecommunications Facilities
NFPA 77 Recommended Practice on Static Electricity
NFPA 79 Electrical Standard for Industrial Machinery
NFPA 80 Standard for Fire Doors and Other Opening Protectives
NFPA 80A Recommended Practice for Protection of Buildings from Exterior Fire Exposures
NFPA 82 Standard on Incinerators and Waste and Linen Handling Systems and Equipment
NFPA 85 Boiler and Combustion Systems Hazards Code
NFPA 86 Standard for Ovens and Furnaces
NFPA 86C Standard for Industrial Furnaces Using a Special Processing Atmosphere
NFPA 86D Standard for Industrial Furnaces Using Vacuum as an Atmosphere
NFPA 87 Recommended Practice for Fluid Heaters
NFPA 88A Standard for Parking Structures
NFPA 88B Standard for Repair Garages
NFPA 90A Standard for the Installation of Air-Conditioning and Ventilating Systems
NFPA 90B Standard for the Installation of Warm Air Heating and Air-Conditioning Systems
NFPA 91 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Particulate Solids
NFPA 92 Standard for Smoke Control Systems
NFPA 92A Standard for Smoke-Control Systems Utilizing Barriers and Pressure Differences
NFPA 92B Standard for Smoke Management Systems in Malls, Atria, and Large Spaces
NFPA 96 Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations
NFPA 97 Standard Glossary of Terms Relating to Chimneys, Vents, and Heat-Producing Appliances
NFPA 99 Health Care Facilities Code
NFPA 99B Standard for Hypobaric Facilities
NFPA 101 Life Safety Code
NFPA 101A Guide on Alternative Approaches to Life Safety
NFPA 101B Code for Means of Egress for Buildings and Structures
NFPA 102 Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures
NFPA 105 Standard for the Installation of Smoke Door Assemblies and Other Opening Protectives
NFPA 110 Standard for Emergency and Standby Power Systems
NFPA 111 Standard on Stored Electrical Energy Emergency and Standby Power Systems
NFPA 115 Standard for Laser Fire Protection
NFPA 120 Standard for Fire Prevention and Control in Coal Mines
NFPA 121 Standard on Fire Protection for Self-Propelled and Mobile Surface Mining Equipment
NFPA 122 Standard for Fire Prevention and Control in Metal/Nonmetal Mining and Metal Mineral Processing Facilities
NFPA 123 Standard for Fire Prevention and Control in Underground Bituminous Coal Mines
NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems
NFPA 140 Standard on Motion Picture and Television Production Studio Soundstages, Approved Production Facilities, and Production Locations
NFPA 150 Standard on Fire and Life Safety in Animal Housing Facilities
NFPA 160 Standard for the Use of Flame Effects Before an Audience
NFPA 170 Standard for Fire Safety and Emergency Symbols
NFPA 203 Guide on Roof Coverings and Roof Deck Constructions
NFPA 204 Standard for Smoke and Heat Venting
NFPA 211 Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances
NFPA 214 Standard on Water-Cooling Towers
NFPA 220 Standard on Types of Building Construction
NFPA 221 Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls
NFPA 225 Model Manufactured Home Installation Standard
NFPA 230 Standard for the Fire Protection of Storage
NFPA 231 Standard for General Storage
NFPA 231C Standard for Rack Storage of Materials
NFPA 231D Standard for Storage of Rubber Tires
NFPA 231E Recommended Practice for the Storage of Baled Cotton
NFPA 231F Standard for the Storage of Roll Paper
NFPA 232 Standard for the Protection of Records
NFPA 232A Guide for Fire Protection for Archives and Records Centers
NFPA 241 Standard for Safeguarding Construction, Alteration, and Demolition Operations
NFPA 251 Standard Methods of Tests of Fire Resistance of Building Construction and Materials
NFPA 252 Standard Methods of Fire Tests of Door Assemblies
NFPA 253 Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source
NFPA 255 Standard Method of Test of Surface Burning Characteristics of Building Materials
NFPA 256 Standard Methods of Fire Tests of Roof Coverings
NFPA 257 Standard on Fire Test for Window and Glass Block Assemblies
NFPA 258 Recommended Practice for Determining Smoke Generation of Solid Materials
NFPA 259 Standard Test Method for Potential Heat of Building Materials
NFPA 260 Standard Methods of Tests and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture
NFPA 261 Standard Method of Test for Determining Resistance of Mock-Up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes
NFPA 262 Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces
NFPA 265 Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls
NFPA 266 Standard Method of Test for Fire Characteristics of Upholstered Furniture Exposed to Flaming Ignition Source
NFPA 267 Standard Method of Test for Fire Characteristics of Mattresses and Bedding Assemblies Exposed to Flaming Ignition Source
NFPA 268 Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source
NFPA 269 Standard Test Method for Developing Toxic Potency Data for Use in Fire Hazard Modeling
NFPA 270 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber
NFPA 271 Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
NFPA 272 Standard Method of Test for Heat and Visible Smoke Release Rates for Upholstered Furniture Components or Composites and Mattresses Using an Oxygen Consumption Calorimeter
NFPA 274 Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
NFPA 275 Standard Method of Fire Tests for the Evaluation of Thermal Barriers
NFPA 276 Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components
NFPA 277 Standard Methods of Tests for Evaluating Fire and Ignition Resistance of Upholstered Furniture Using a Flaming Ignition Source
NFPA 285 Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components
NFPA 286 Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
NFPA 287 Standard Test Methods for Measurement of Flammability of Materials in Cleanrooms Using a Fire Propagation Apparatus (FPA)
NFPA 288 Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance-Rated Assemblies
NFPA 289 Standard Method of Fire Test for Individual Fuel Packages
NFPA 290 Standard for Fire Testing of Passive Protection Materials for Use on LP-Gas Containers
NFPA 291 Recommended Practice for Fire Flow Testing and Marking of Hydrants
NFPA 295 Standard for Wildfire Control
NFPA 297 Guide on Principles and Practices for Communications Systems
NFPA 298 Standard on Foam Chemicals for Wildland Fire Control
NFPA 299 Standard for Protection of Life and Property from Wildfire
NFPA 301 Code for Safety to Life from Fire on Merchant Vessels
NFPA 302 Fire Protection Standard for Pleasure and Commercial Motor Craft
NFPA 303 Fire Protection Standard for Marinas and Boatyards
NFPA 306 Standard for the Control of Gas Hazards on Vessels
NFPA 307 Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves
NFPA 312 Standard for Fire Protection of Vessels During Construction, Conversion, Repair, and Lay-Up
NFPA 318 Standard for the Protection of Semiconductor Fabrication Facilities
NFPA 326 Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair
NFPA 328 Recommended Practice for the Control of Flammable and Combustible Liquids and Gases in Manholes, Sewers, and Similar Underground Structures
NFPA 329 Recommended Practice for Handling Releases of Flammable and Combustible Liquids and Gases
NFPA 350 Guide for Safe Confined Space Entry and Work
NFPA 385 Standard for Tank Vehicles for Flammable and Combustible Liquids
NFPA 386 Standard for Portable Shipping Tanks for Flammable and Combustible Liquids
NFPA 395 Standard for the Storage of Flammable and Combustible Liquids at Farms and Isolated Sites
NFPA 400 Hazardous Materials Code
NFPA 402 Guide for Aircraft Rescue and Fire-Fighting Operations
NFPA 403 Standard for Aircraft Rescue and Fire-Fighting Services at Airports
NFPA 405 Standard for the Recurring Proficiency of Airport Fire Fighters
NFPA 407 Standard for Aircraft Fuel Servicing
NFPA 408 Standard for Aircraft Hand Portable Fire Extinguishers
NFPA 409 Standard on Aircraft Hangars
NFPA 410 Standard on Aircraft Maintenance
NFPA 412 Standard for Evaluating Aircraft Rescue and Fire-Fighting Foam Equipment
NFPA 414 Standard for Aircraft Rescue and Fire-Fighting Vehicles
NFPA 415 Standard on Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways
NFPA 418 Standard for Heliports
NFPA 422 Guide for Aircraft Accident/Incident Response Assessment
NFPA 423 Standard for Construction and Protection of Aircraft Engine Test Facilities
NFPA 424 Guide for Airport/Community Emergency Planning
NFPA 430 Code for the Storage of Liquid and Solid Oxidizers
NFPA 432 Code for the Storage of Organic Peroxide Formulations
NFPA 434 Code for the Storage of Pesticides
NFPA 450 Guide for Emergency Medical Services and Systems
NFPA 471 Recommended Practice for Responding to Hazardous Materials Incidents
NFPA 472 Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents
NFPA 473 Standard for Competencies for EMS Personnel Responding to Hazardous Materials/Weapons of Mass Destruction Incidents
NFPA 475 Recommended Practice for Responding to Hazardous Materials Incidents/Weapons of Mass Destruction
NFPA 480 Standard for the Storage, Handling, and Processing of Magnesium Solids and Powders
NFPA 481 Standard for the Production, Processing, Handling, and Storage of Titanium
NFPA 482 Standard for the Production, Processing, Handling, and Storage of Zirconium
NFPA 484 Standard for Combustible Metals
NFPA 485 Standard for the Storage, Handling, Processing, and Use of Lithium Metal
NFPA 490 Code for the Storage of Ammonium Nitrate
NFPA 495 Explosive Materials Code
NFPA 496 Standard for Purged and Pressurized Enclosures for Electrical Equipment
NFPA 497 Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
NFPA 498 Standard for Safe Havens and Interchange Lots for Vehicles Transporting Explosives
NFPA 499 Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
NFPA 501 Standard on Manufactured Housing
NFPA 501A Standard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities
NFPA 502 Standard for Road Tunnels, Bridges, and Other Limited Access Highways
NFPA 505 Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations
NFPA 513 Standard for Motor Freight Terminals
NFPA 520 Standard on Subterranean Spaces
NFPA 550 Guide to the Fire Safety Concepts Tree
NFPA 551 Guide for the Evaluation of Fire Risk Assessments
NFPA 555 Guide on Methods for Evaluating Potential for Room Flashover
NFPA 556 Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles
NFPA 557 Standard for Determination of Fire Loads for Use in Structural Fire Protection Design
NFPA 560 Standard for the Storage, Handling, and Use of Ethylene Oxide for Sterilization and Fumigation
NFPA 600 Standard on Industrial Fire Brigades
NFPA 601 Standard for Security Services in Fire Loss Prevention
NFPA 610 Guide for Emergency and Safety Operations at Motorsports Venues
NFPA 650 Standard for Pneumatic Conveying Systems for Handling Combustible Particulate Solids
NFPA 651 Standard for the Machining and Finishing of Aluminum and the Production and Handling of Aluminum Powders
NFPA 652 Standard on Combustible Dusts
NFPA 654 Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids
NFPA 655 Standard for Prevention of Sulfur Fires and Explosions
NFPA 664 Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities
NFPA 701 Standard Methods of Fire Tests for Flame Propagation of Textiles and Films
NFPA 703 Standard for Fire Retardant—Treated Wood and Fire–Retardant Coatings for Building Materials
NFPA 704 Standard System for the Identification of the Hazards of Materials for Emergency Response
NFPA 705 Recommended Practice for a Field Flame Test for Textiles and Films
NFPA 720 Standard for the Installation of Carbon Monoxide(CO) Detection and Warning Equipment
NFPA 730 Guide for Premises Security
NFPA 731 Standard for the Installation of Electronic Premises Security Systems
NFPA 750 Standard on Water Mist Fire Protection Systems
NFPA 780 Standard for the Installation of Lightning Protection Systems
NFPA 790 Standard for Competency of Third-Party Field Evaluation Bodies
NFPA 791 Recommended Practice and Procedures for Unlabeled Electrical Equipment Evaluation
NFPA 801 Standard for Fire Protection for Facilities Handling Radioactive Materials
NFPA 803 Standard for Fire Protection for Light Water Nuclear Power Plants
NFPA 804 Standard for Fire Protection for Advanced Light Water Reactor Electric Generating Plants
NFPA 805 Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants
NFPA 806 Performance-Based Standard for Fire Protection for Advanced Nuclear Reactor Electric Generating Plants Change Process
NFPA 820 Standard for Fire Protection in Wastewater Treatment and Collection Facilities
NFPA 850 Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations
NFPA 851 Recommended Practice for Fire Protection for Hydroelectric Generating Plants
NFPA 853 Standard for the Installation of Stationary Fuel Cell Power Systems
NFPA 900 Building Energy Code
NFPA 901 Standard Classifications for Incident Reporting and Fire Protection Data
NFPA 902 Fire Reporting Field Incident Guide
NFPA 903 Fire Reporting Property Survey Guide
NFPA 904 Incident Follow-up Report Guide
NFPA 906 Guide for Fire Incident Field Notes
NFPA 909 Code for the Protection of Cultural Resource Properties - Museums, Libraries, and Places of Worship
NFPA 914 Code for Fire Protection of Historic Structures
NFPA 921 Guide for Fire and Explosion Investigations
NFPA 950 Standard for Data Development and Exchange for the Fire Service
NFPA 951 Guide to Building and Utilizing Digital Information
NFPA 1000 Standard for Fire Service Professional Qualifications Accreditation and Certification Systems
NFPA 1001 Standard for Fire Fighter Professional Qualifications
NFPA 1002 Standard for Fire Apparatus Driver/Operator Professional Qualifications
NFPA 1003 Standard for Airport Fire Fighter Professional Qualifications
NFPA 1005 Standard for Professional Qualifications for Marine Fire Fighting for Land-Based Fire Fighters
NFPA 1006 Standard for Technical Rescuer Professional Qualifications
NFPA 1021 Standard for Fire Officer Professional Qualifications
NFPA 1026 Standard for Incident Management Personnel Professional Qualifications
NFPA 1031 Standard for Professional Qualifications for Fire Inspector and Plan Examiner
NFPA 1033 Standard for Professional Qualifications for Fire Investigator
NFPA 1035 Standard on Fire and Life Safety Educator, Public Information Officer, Youth Firesetter Intervention Specialist and Youth Firesetter Program Manager Professional Qualifications
NFPA 1037 Standard for Professional Qualifications for Fire Marshal
NFPA 1041 Standard for Fire Service Instructor Professional Qualifications
NFPA 1051 Standard for Wildland Fire Fighter Professional Qualifications
NFPA 1061 Professional Qualifications for Public Safety Telecommunications Personnel
NFPA 1071 Standard for Emergency Vehicle Technician Professional Qualifications
NFPA 1072 Standard for Hazardous Materials/Weapons of Mass Destruction Emergency Response Personnel Professional Qualifications
NFPA 1081 Standard for Industrial Fire Brigade Member Professional Qualifications
NFPA 1091 Standard for Traffic Control Incident Management Professional Qualifications
NFPA 1122 Code for Model Rocketry
NFPA 1123 Code for Fireworks Display
NFPA 1124 Code for the Manufacture, Transportation, Storage, and Retail Sales of Fireworks and Pyrotechnic Articles
NFPA 1125 Code for the Manufacture of Model Rocket and High Power Rocket Motors
NFPA 1126 Standard for the Use of Pyrotechnics Before a Proximate Audience
NFPA 1127 Code for High Power Rocketry
PYR 1128 Standard Method of Fire Test for Flame Breaks
PYR 1129 Standard Method of Fire Test for Covered Fuse on Consumer Fireworks
NFPA 1141 Standard for Fire Protection Infrastructure for Land Development in Wildland, Rural, and Suburban Areas
NFPA 1142 Standard on Water Supplies for Suburban and Rural Fire Fighting
NFPA 1143 Standard for Wildland Fire Management
NFPA 1144 Standard for Reducing Structure Ignition Hazards from Wildland Fire
NFPA 1145 Guide for the Use of Class A Foams in Manual Structural Fire Fighting
NFPA 1150 Standard on Foam Chemicals for Fires in Class A Fuels
NFPA 1192 Standard on Recreational Vehicles
NFPA 1194 Standard for Recreational Vehicle Parks and Campgrounds
NFPA 1201 Standard for Providing Fire and Emergency Services to the Public
NFPA 1221 Standard for the Installation, Maintenance, and Use of Emergency Services Communications Systems
NFPA 1231 Standard on Water Supplies for Suburban and Rural Fire Fighting
NFPA 1250 Recommended Practice in Fire and Emergency Service Organization Risk Management
NFPA 1300 Standard for Community Risk Reduction (CRR) Plans
NFPA 1401 Recommended Practice for Fire Service Training Reports and Records
NFPA 1402 Guide to Building Fire Service Training Centers
NFPA 1403 Standard on Live Fire Training Evolutions
NFPA 1404 Standard for Fire Service Respiratory Protection Training
NFPA 1405 Guide for Land-Based Fire Departments that Respond to Marine Vessel Fires
NFPA 1407 Standard for Training Fire Service Rapid Intervention Crews
NFPA 1408 Standard for Training Fire Service Personnel in the Operation, Care, Use, and Maintenance of Thermal Imagers
NFPA 1410 Standard on Training for Emergency Scene Operations
NFPA 1451 Standard for a Fire and Emergency Services Vehicle Operations Training Program
NFPA 1452 Guide for Training Fire Service Personnel to Conduct Community Risk Reduction
NFPA 1500 Standard on Fire Department Occupational Safety and Health Program
NFPA 1521 Standard for Fire Department Safety Officer Professional Qualifications
NFPA 1561 Standard on Emergency Services Incident Management System and Command Safety
NFPA 1581 Standard on Fire Department Infection Control Program
NFPA 1582 Standard on Comprehensive Occupational Medical Program for Fire Departments
NFPA 1583 Standard on Health-Related Fitness Programs for Fire Department Members
NFPA 1584 Standard on the Rehabilitation Process for Members During Emergency Operations and Training Exercises
NFPA 1600 Standard on Disaster/Emergency Management and Business Continuity Programs
NFPA 1616 Standard for Mass Evacuation and Sheltering
NFPA 1620 Standard for Pre-Incident Planning
NFPA 1670 Standard on Operations and Training for Technical Search and Rescue Incidents
NFPA 1710 Standard for the Organization and Deployment of Fire Suppression Operations, Emergency Medical Operations, and Special Operations to the Public by Career Fire Departments
NFPA 1720 Standard for the Organization and Deployment of Fire Suppression Operations, Emergency Medical Operations and Special Operations to the Public by Volunteer Fire Departments
NFPA 1730 Standard on Organization and Deployment of Fire Prevention Inspection and Code Enforcement, Plan Review, Investigation, and Public Education Operations to the Public
NFPA 1801 Standard on Thermal Imagers for the Fire Service
NFPA 1802 Standard on Personal Portable (Hand-Held) Two-Way Radio Communications Devices for Use by Emergency Services Personnel in the Hazard Zone
NFPA 1851 Standard on Selection, Care, and Maintenance of Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
NFPA 1852 Standard on Selection, Care, and Maintenance of Open-Circuit Self-Contained Breathing Apparatus (SCBA)
NFPA 1855 Standard for Selection, Care, and Maintenance of Protective Ensembles for Technical Rescue Incidents
NFPA 1858 Standard on Selection, Care, and Maintenance of Life Safety Rope and Equipment for Emergency Services
NFPA 1901 Standard for Automotive Fire Apparatus
NFPA 1906 Standard for Wildland Fire Apparatus
NFPA 1911 Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus
NFPA 1912 Standard for Fire Apparatus Refurbishing
NFPA 1914 Standard for Testing Fire Department Aerial Devices
NFPA 1915 Standard for Fire Apparatus Preventive Maintenance Program
NFPA 1917 Standard for Automotive Ambulances
NFPA 1925 Standard on Marine Fire-Fighting Vessels
NFPA 1931 Standard for Manufacturer's Design of Fire Department Ground Ladders
NFPA 1932 Standard on Use, Maintenance, and Service Testing of In-Service Fire Department Ground Ladders
NFPA 1936 Standard on Powered Rescue Tools
NFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents
NFPA 1952 Standard on Surface Water Operations Protective Clothing and Equipment
NFPA 1953 Standard on Protective Ensembles for Contaminated Water Diving
NFPA 1961 Standard on Fire Hose
NFPA 1962 Standard for the Care, Use, Inspection, Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances
NFPA 1963 Standard for Fire Hose Connections
NFPA 1964 Standard for Spray Nozzles
NFPA 1965 Standard for Fire Hose Appliances
NFPA 1971 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
NFPA 1975 Standard on Station/Work Uniforms for Emergency Services
NFPA 1976 Standard on Protective Ensemble for Proximity Fire Fighting
NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting
NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus (SCBA) for Emergency Services
NFPA 1982 Standard on Personal Alert Safety Systems (PASS)
NFPA 1983 Standard on Life Safety Rope and Equipment for Emergency Services
NFPA 1984 Standard on Respirators for Wildland Fire Fighting Operations
NFPA 1986 Standard on Respiratory Protection Equipment for Technical and Tactical Operations
NFPA 1989 Standard on Breathing Air Quality for Emergency Services Respiratory Protection
NFPA 1991 Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies
NFPA 1992 Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials Emergencies
NFPA 1994 Standard on Protective Ensembles for First Responders to CBRN Terrorism Incidents
NFPA 1999 Standard on Protective Clothing for Emergency Medical Operations
NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems
NFPA 2010 Standard for Fixed Aerosol Fire-Extinguishing Systems
NFPA 2112 Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire
NFPA 2113 Standard on Selection, Care, Use, and Maintenance of Flame-Resistant Garments for Protection of Industrial Personnel Against Short-Duration Thermal Exposures
NFPA 5000 Building Construction and Safety Code
NFPA 8501 Standard for Single Burner Boiler Operation
NFPA 8502 Standard for the Prevention of Furnace Explosions/Implosions in Multiple Burner Boilers
NFPA 8503 Standard for Pulverized Fuel Systems
NFPA 8504 Standard on Atmospheric Fluidized-Bed Boiler Operation
NFPA 8505 Standard for Stoker Operation
NFPA 8506 Standard on Heat Recovery Steam Generator Systems

2015년 2월 4일 수요일

건축 자재의 표면 연소에 대한 ASTM E 84 시험 방법
건축 자재에 ASTM E84 화재 테스트

표준 - 건축 자재에 대한 ASTM E84 화재 시험
ASTM E84 : 건축 자재의 표면 연소 특성에 대한 표준 시험 방법

ASTM E 건축 자재에 84 화재 시험 - 표준 개요
화염 확산시험.
터널 방법과 자주 방사판 시험.

건축 자재 - 테스트 방법에 대한 ASTM E84 화재 시험
ASTM E 84 Standard Test Method for Surface Burning Characteristics of Building Materials
Sample size required : 610mmx7300mm

터널 테스트 비교 방식, 표면연소를 테스트하는 것임(석면 합판은 0 수준, 오크 바닥 100 수준.)
이 시험에서, 연소시에 발생 연기도 측정하고, 동일 클래스 내에서 나누어. 처음 10 분 안에이 수준을 결정 함.
0 ~ 200 사이의 값 사이의 터널 FSI, 소재의 FSI 값이 작을수록, 화재의 위험이 작은 재료의 결정함.

건축 자재 - 제품 분류에 ASTM E84 화재 시험ASTM E84 Class
  0 - 25 : class A,
  26 - 75 : class B,
  76-200 미만 : class C,

건축 자재에 대한 ASTM E84 화재 테스트 - 상대 표준
- BS 476 : 건축 자재 및 구조에 대한 화재 시험
- BS 476-7 : 화재 건축 자재에 대한 시험 및 구조 제 7 부 : 시험 방법 제품의 화염의 표면 확산의 분류를 결정
BS476-7:Fire Tests on Building materials and structures – Method of test to determine the classification of the surface spread of flame of products
Sample size required : 885 mm X 270 mm X thickness (less than 50mm)X9 PCS
- EN 13501-1 : 화재 건축 자재의 분류 및 파트 1 - 건물 : 분류 반응에서 데이터를 사용하여 테스트
- NF P 92-501 : 안전 화재에 대한 - 건축 자재 - 시험 발사 반응 - 단단한 재료에 사용되는 방사선 검사.
- NF P 92-503 : 안전 화재에 대한 - 건축 자재 - 시험 발사 반응. 유연한 재료에 사용되는 전기 버너 테스트
- GB 8624 : 건축 자재 및 제품 분류
- GB 20286 : 공공 장소에서 화재 지연 제품과 서브 어셈블리에 대한 요구 사항 및 표시

2015년 1월 26일 월요일

Hanwha L&C Floor score

한화 L&C는 Hanwha Gold Tile, Hanwha Loose Lay, Hanwha Noble Tile Click, Hanwha OA 등 일련의 제품에 대해 FloorScore® 를 인증받았습니다.

FloorScore®는 Indoor Air Quality Certified to SCS-EC10.2-2007에 근거하여
California Specification 01350 (Standard Method v1.1, effective January 1, 2012) for the school classroom and private office parameters에 적합함을 인증하는 것입니다.

2014년 8월 28일 목요일

러시아 설계인증 GOST RDI Russian Design Institute

출처 : http://www.anycerti.com/?p=3980

RDI(Russian Design Institue) Approval
러시아 설계학회 기술승인관련 안내입니다.

특정 품목은 러시아 설계학회가 주관하는 안전승인을 받도록 되어 있습니다.
- 아래외 설계협회기술승인 대상품목은 별도 상의 바랍니다.

Air Coolers

TU 3612-127-00220302-2007 air coolers for nominal pressure up to 16 MPa.Specifications (TU 3681-001-00220302-96 Instead, TU 3681-002-00220302-96, TU 3681-003-00220302-96 TU 3681-011-00220302-96, TU 3612-035-00220302-01, TU 26 – 02-596-96, TU 26-02-913-96, TU 26-02-955-83 (except apparatus AUG-320 / B), TU 26-02-959-83, TU 26-02-1043-87 TU 26-02-1121-96, 26-02-1157-96 TU, TU 26-02-1158-96)	Introduced from 01.07.2007
TU 3612-128-00220302-2007 air coolers for nominal pressure of 16 MPa to 32 MPa.Specifications. (Instead 26-02-926-81 TU, TU 26-02-955-83 regarding vehicles AUG-320 / B)	Introduced from 01.07.2007
TU 3612-152-00220302-2009 Air Coolers individual performance	Introduced for the first time with 15.04.2009g.
TU 3619-171-00220302-2012 Devices louvers for air cooling apparatuses	Introduced for the first time since 01.03.2012.

Heat-Exchange Equipment

GOST R 53677-2009 Petroleum and natural gas industries. Shell and tube heat exchangers. Technical requirements. (Together with “Petrokhim Engineering”)	Activated 01.01.2011 (first)
GOST R ISO 15547-1-2009 Petroleum and natural gas industries. Plate теплообменники.Технические requirements.	Activated 01.01.2011 (first)
TU 26-02-1102-89 tube heat exchangers increased thermal efficiency of the expander to the body. Chg. № 1-8	No expiration date
TU 3113-028-00220302-01 Heaters steam-and water-water heat networks for heating and hot water. Chg. № 3,4	to 01.01.2016, the
TU 3612-005-00220302-98 tube heat exchangers for special purposes. Thermosiphon evaporators. Chg. № 3,4	to 01.01.2016, the
TU 3612-007-00220302-99 tube heat exchangers for special purposes. Vacuum capacitors. Chg. № 3,4	to 01.01.2016, the
TU 3612-013-00220302-99 tube heat exchangers for special purposes. The evaporators with a steam space and bundles them. Chg. № 3,4	to 01.01.2016, the
TU 3612-014-00220302-99 Heat “pipe in pipe”. Chg. № 1,5,6	to 01.01.2016, the
TU 3612-023-00220302-01 tube heat exchangers with floating head, shell and tube with a U-shaped tubes and tube bundles for them. Chg. № 4,5	to 01.01.2016, the
TU 3612-024-00220302-02 tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the casing. Chg. № 3,4	to 01.01.2016, the
TU 3644-006-00220302-99 tube heat exchangers for special purposes. Refrigeration evaporators and condensers. Chg. № 3,4	to 01.01.2016, the
ATK 24.202.09-2004 tube heat exchangers with floating head, shell and tube with a U-shaped tubes, twin. Main dimensions. Chg. Number 1	No expiration date
ATK 24.202.10-2007 tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the casing. Blocks. Main dimensions	No expiration date
ATK-ER-2013 tube heat exchangers and heat exchangers “pipe in pipe”. Instruction manual	No expiration date

Tube Furnace and Flare

Catalog “Tube furnaces”
Catalog “flares”
GOST R 53681-2009 Petroleum and natural gas industries. Details flare devices for general work in refineries. General technical requirements	Activated 01.01.2011 (first)
GOST R 53682-2009 Installations for heating oil refineries. General technical requirements	Activated 01.01.2011 (first)
RD 26-02-80-2004 coils welded to tube furnaces. Requirements for the design, construction and operation (2nd ed. 2007).
STO 00220302-007-2013 tubular heating furnace. Requirements for the design, construction and operation	In the process of developing

High Temperature Reaction Materials

TU 0993-098-00220302-2005 Rolled sheet of heat-resistant and heat-resistant steels and alloys
TU 0995-097-00220302-2005 two-layer corrosion-resistant steel sheet
TU 0995-175-00220302-2012 corrosion-resistant sheet steel double layer and three-layer made by explosion welding
TU 1333-047-00220302-02 Pipes centrifugally from heat-resistant and corrosion-resistant steels and alloys
TU 1333-048-00220302-02 Pipes and reactionary elements of heat-resistant steels and alloys
TU 1333-078-00220302-2004 Pipes and reactionary elements of heat-resistant steels and alloys for high-temperature petrochemical equipment
TU 1333-092-00220302-2005 Pipes centrifugally from heat-resistant steels and alloys
TU 1333-094-00220302-2005 Pipes centrifugally from corrosion and heat resistant steels and alloys for high temperature reaction tube furnaces petrochemical equipment
TU 1333-095-00220302-2005 reaction tubes of corrosion-resistant and heat-resistant steels and alloys for high-temperature tube furnaces petrochemical equipment
TU 1333-111-00220302-2006 pipes of centrifugally cast heat-resistant and heat-resistant steels and alloys for high temperature tube furnaces
TU 1333-147-00220302-2009 pipes of centrifugally cast heat-resistant alloys and sverhzharoprochnyh for high-temperature tube furnaces
TU 1333-159-00220302-2011 pipes of centrifugally cast heat-resistant and heat-resistant steels and alloys for high temperature equipment refining and petrochemical industries
TU 1333-172-00220302/31-2012 pipes of centrifugally cast heat-resistant and heat-resistant steels and alloys for high temperature equipment petrochemical and gas processing industries
TU 1468-099-00220302-2005 Taps Stamped from heat-resistant and corrosion-resistant steels and alloys up to PN 10 N / mm ²
TU 1882-174-00220302-2013 corrosion-resistant sheet steel double layer and three-layer made by explosion welding
TU 26-02-5475-94 Pipes centrifugally from heat-resistant steels and alloys
TU 26-02-5476-93 castings molded from heat resisting steels for furnace coils petrochemical equipment
TU 3689-112-00220302-2006 reaction tubes of heat-resistant and heat-resistant steels and alloys for high temperature tube furnaces
TU 3689-145-00220302-2009 reaction tubes of heat-resistant steels and alloys for high temperature tube furnaces (instead of TU 1333-093-00220302-2005)
TU 3689-160-00220302-2011 Pipes and reactionary elements of the heat-resistant and heat-resistant steels and alloys for high temperature equipment refining and petrochemical industries
TU 3689-173-00220302/31-2012 Pipes and reactionary elements of the heat-resistant and heat-resistant steels and alloys for high temperature equipment petrochemical and gas processing industries
TU 4112-077-00220302-2003 shaped castings of heat-resistant steels and alloys for the reaction tube furnaces
TU 4112-084-00220302-2004 shaped castings of high-alloy steels and alloys for the reaction coil tube furnaces
TU 4112-108-00220302-2006 castings molded from heat-resistant and heat-resistant steels and alloys for heating and heat exchange equipment petrochemical production
TU 4112-155-00220302-2010 shaped castings of heat-resistant steels and alloys for high temperature tube furnaces
RD 0002-001-00220302/31-2011 Causes and reason codes changes. Guidance document on standardization. Design documentation	Activated 11.01.2011
RD 3689-001-00220302/31-2004 radiant tubes and components for the reaction tube furnaces. Requirements for the design, manufacture and supply (2nd ed. 2008)
RD 3689-002-00220302/31-2008 Welding pipes and radiant elements for reaction tube furnaces (completed and processed)
STO 00220302-001-2009 Guidelines for control of technical condition and residual life assessment of the reaction tubes tube furnaces
STO 00220302-002-2011 Guidelines for control of technical condition and residual life assessment coil tube furnaces
STO 00220302-003-2011 Supervision of the development and production of high-temperature tube furnaces equipment
STO 00220302-006-2013 Guidelines for control of technical condition and life assessment (planned, residual) and outboard bearing support elements disposed in the interior of tube furnaces

Training Machines Oil

TU 3611-158-00220302-2011 Internals for rectification, extraction and separation equipment (removable parts) (together with “Neftehimmash”)	Introduced from 10.07.2011, the (first)
TU 3683-009-00220302-96 Power Supplies High IPM-15/15, IPM-9/15, IPM-25/15, IPM-25/22	Introduced from 20.12.96, the (first)
TU 3683-107-00220302-2005 electric dehydrators. Chg. Number 1	Introduced from 15.01.2006, the (first)
TU 3689-020-00220302-99 Insulator PTFE suspension IPOF-25	Introduced from 15.02.99 g (first)
TU 3689-033-00220302-00 Passing insulator PTFE IAP-25	Introduced for the first time
TU 3689-104-00220302-2005 Insulator Teflon support-pass IOPF	Introduced for the first time
TU 3689-105-00220302-2005 Insulator hanging IOPF-St-25	Introduced for the first time

Receptacles for Liquefied Gases Storage

TU 3615-044-00220302-2007 Horizontal cylindrical tanks for liquefied petroleum gases propane and butane. Chg. Number 1, 2, 3 (instead of TU 3615-044-00220302-02)	to 12.01.2017, the
TU 3615-132-00220302-2008 ball Reservoirs for liquified hydrocarbon gases. Chg.Number 1	Activated 01.03.2008 (first)

Vessels and Devices Pipelines

GOST R 52630-2012 vessels and apparatus welded steel. General specifications (GOST R 52630-2012 return) (jointly JSC “Petrokhim Engineering” and JSC “NIICHIMMASH”) GOST R 52630-2012	Introduced 01.04.2013g.
GOST R 53684-2009 Apparatuses column. Technical requirements (together with “Petrokhim Engineering”)	01.01.2011 entered. (First)
OST 26 291-94 vessels and apparatus welded steel. General specifications (together with “NIICHIMMASH”, JSC “Petrokhim Engineering”, JSC “VNIIPTkhimnefteapparatury”)	to 01.10.2011
OST 26.260.480-2003 vessels and apparatus of the double-layer steel. Welding and surfacing (in conjunction with “VNIIPTkhimnefteapparatury”)
CA 03-005-07 Process piping oil refining, petrochemical and chemical industries.Requirements for the construction and operation (with NTP “Pipeline”)
STO 00220368-009-2006 Repair peeling of plating layer of corrosion-resistant steels and alloys identified in the manufacturing process of two-layer sheets and bimetallic devices with a base layer of carbon, alloy and chrome-molybdenum steel. Typical process (together of “VNIIPTkhimnefteapparatury”)
STO 00220368-012-2008 welding vessels, equipment and pipelines made of carbon and low alloy steels (in conjunction with “VNIIPTkhimnefteapparatury”)
STO 00220368-013-2009 welding vessels, equipment and pipelines of high-alloy steel (in conjunction with “VNIIPTkhimnefteapparatury”)
SRT 00220575.063-2005 receptacles, devices and components technological installations for preparation and processing of oil and gas containing hydrogen sulfide and causing corrosion cracking (with DOAO “CKBN” and JSC “VNIIPTkhimnefteapparatury”)

Products and Materials for Refining and Petrochemical Industry

GOST R 53678-2009 Petroleum and natural gas industries. Materials for use in environments containing hydrogen sulphide in oil and gas. Part 2. Carbon and low alloyed steel, resistant to cracking, and the use of cast irons. (With DOAO “CKBN”, JSC “Petrokhim Engineering”, LLC “VNIIGAZ” TSTSK TsNIIchermet, OAO “Russian Scientific Research Institute of the Pipe Industry”)	01.01.2011 entered g (first)
GOST R 53679-2009 Petroleum and natural gas industries. Materials for use in environments containing hydrogen sulphide in oil and gas. Part 1. General principles for the selection of materials resistant to cracking (with DOAO “CKBN”, JSC “Petrokhim Engineering”, LLC “VNIIGAZ” TSTSK TsNIIchermet, JSC “Russian Scientific Research Institute of the Pipe Industry”)	01.01.2011 entered g (first)
STF 26.260.486-2005 catalog analogues of imported and domestic general and welding materials used in the manufacture of vessels, equipment and pipelines, Rostechnadzor (together with JSC VNIIPTkhimnefteapparatury “)
TU 00220368-067-2003 two-layer corrosion-resistant steel sheet 09G2S X18H10T 08 (in conjunction with “VNIIPTkhimnefteapparatury” VSTU of “Volgogradneftemash”)
TU 00220368-070-2004 two-layer corrosion-resistant steel sheet brand 12KhM X18H10T 08 (in conjunction with “VNIIPTkhimnefteapparatury” VSTU of “Volgogradneftemash”)
TU 05764417-013-93 billets of steel grades 09GSNBTS, 09HGN2AB, 20kA, 08G2MFA (with X TsNIIchermet and JSC “Izhora Plants”)
TU 05764417-041-95 Double sheets and blanks (in conjunction with “Izhora Plants”)
TU 0900-001-33902054-2003 sheets of steel 15H5M (together with “Technokhim”)
TU 13600-14-16427522-2008 Seamless cold-and warm-deformed of stainless austenitic steel supplied by imports (together with “NTP Pipeline”)
TU 14-105-841-2008 Rolled steel and corrosion-resistant two-ply roll made by electroslag welding (with the “Institute of bimetallic alloys”)
TU 14-105-878-2010 rolled products of alloy steel 12CrMo, intended for the manufacture of vessels and equipment operating under pressure (with the “Institute of bimetallic alloys”)
TU 14-3P-54-2001 Seamless hot steel 20YUCH (together with “RosNITI”)
TU 14-3P-62-2002 hot-rolled seamless steel pipes of steel grade 15H5M for petroleum refining industry (together with “RosNITI”)
TU 14-3P-110-2009 hot-walled tubes of corrosion-resistant steels (in conjunction with “NIICHIMMASH”, FSUE “TsNIIchermet”)
TU 16.65.28.51-2007 two-layer corrosion-resistant steel sheet made by explosion welding (with “NPO TMV”)
TU 27.32.09.010-2005 two-layer corrosion-resistant steel sheet made by explosion welding (with the “Institute of bimetallic alloys”)
TU 302.02.014-89 Billets RPV oil hydrocracking unit (in conjunction with “Izhora Plants”)
TU 302.02.031-89 billets of steel grades 12CrMo, 15CrMo. 12CrMo 15CrMo-VD-VD and (in conjunction with “Izhora Plants”)
TU 302.02.121-91 billets of steel grades A and 10H2M1A 10H2M1A (10H2M1A-VD, 10H2M1A-W) (in conjunction with “Izhora Plants”)
TU 302.02.122-91 billets of steel grades 09G2C (09G2C-W), 09G2SA (together with “Izhora Plants”)
TU-HX 001-08-09 bimetallic sheets and plates made by explosion welding, designed for chemical and petrochemical engineering (together with “Energometall”)

Vessels and Apparatuses. Limits and Methods of Strength Calculation

GOST 14249-89 vessels and vehicles. Norms and methods of strength calculation (together about JSC “NIICHIMMASH”)
GOST 25822-83 vessels and vehicles. Air coolers. Norms and methods of strength calculation
GOST 26202-84 vessels and vehicles. Norms and methods for calculating the strength of shells and bottoms against bearing loads (in conjunction with “NIICHIMMASH” and NIICHIMMASH Ukr)
GOST 30780-2002 steel vessels and apparatus. Compensators and bellows lens.Norms and methods of strength calculation (together with “Petrokhim Engineering” and JSC “NIICHIMMASH”)
GOST 51273-99 vessels and vehicles. Limits and methods of strength calculation.Definition of settlement efforts for turrets on the wind load and seismic effects (together with “Petrokhim Engineering” and JSC “NIICHIMMASH”)
GOST 51274-99 vessels and vehicles. Turrets. Norms and methods of strength calculation (together with “Petrokhim Engineering” and JSC “NIICHIMMASH”)
GOST R 52857.1-2007 – GOST R 52857.12-2007 Collection “vessels and vehicles.Norms and methods of strength calculation “(together with” NIICHIMMASH “and ZAO” Petrokhim Engineering “)
GOST R 54522-2011 Vessels and Pressure Vessels. Limits and methods of strength calculation. Calculation of cylindrical shells, heads, flanges, caps. Guiding Design (together with “IrkutskNIIhimmash”, OAO “NIICHIMMASH”)
RD 26.260.16-2002 Expert technical diagnostics of vessels and equipment operating under pressure on mining and processing facilities of gas, gas condensate and oil in the northern regions of the Russian Federation, and underground gas storage facilities (with OAO “Gazprom” DOAO “CKBN” TSNIITMASH, JSC “TsNIIPSK” them. NP Melnikov, STC “DIATEKS” MEI (TU))
RD 26-02-76-88 Methods of calculating the strength of the wall of the column in the place of installation and mounting fittings bestrosovyh seizures (with Giproneftespetsmontazhom)
RD 26-02-84-89 Methods for calculating the strength of special designs shell and tube heat exchangers and devices such as “pipe in pipe”
RTM 26-02-65-83 Strength calculation of the elements of air-cooled high-pressure

Methods of Corrosion Protection

RTM 26-02-39-84 Methods of corrosion protection and the choice of materials for major elements and components of devices and installations for preparation of primary oil refining (CDU, AVT, AT, CDU VDU)
RTM 26-02-42-78 Methods of corrosion protection and the choice of materials for major elements and components of catalytic reforming units
RTM 26-02-43-79 Methods of corrosion protection and the choice of materials for major elements and nodes devices installations of synthetic fatty acids (FFA)
RTM 26-02-54-80 Financial clearance of equipment installations diesel hydrotreating unit with monoethanolamine cleaning

Testing and Diagnosis

SRT 00220302/67-001/1-2012 Eddy NDT method elements of vessels and apparatuses	01.11.2012 entered g (first)
SRT 00220302/67-002-2012 Determination of ferrite eddy current method	01.11.2012 entered g (first)
SRT 00220302/67-003-2012 Boilers rail tank models 15-1424-03,15-1226. To recover passports	01.11.2012 entered g (first)
SRT 00220302/67-004-2012 Tanks based on motor vehicles for transportation of light oil. Recovery order passports	01.11.2012 entered g (first)
SRT 00220302/67-005-2012 air coolers. Recovery order passports	01.11.2012 entered g (first)
00220302/67-006-2012 stations. Coercimetric survey vessels and vehicles
00220302/67-007-2014 stations. Monitoring and evaluation of defects parameters metal cladding layer using eddy current scanner
00220302/67-008-2014 stations. Monitoring and evaluation of defects parameters metal castings compressor using eddy current scanner

High Temperature Reaction Materials

TU 0993-098-00220302-2005 Rolled sheet of heat-resistant and heat-resistant steels and alloys
TU 0995-097-00220302-2005 two-layer corrosion-resistant steel sheet
TU 0995-175-00220302-2012 corrosion-resistant sheet steel double layer and three-layer made by explosion welding
TU 1333-047-00220302-02 Pipes centrifugally from heat-resistant and corrosion-resistant steels and alloys
TU 1333-048-00220302-02 Pipes and reactionary elements of heat-resistant steels and alloys
TU 1333-078-00220302-2004 Pipes and reactionary elements of heat-resistant steels and alloys for high-temperature petrochemical equipment
TU 1333-092-00220302-2005 Pipes centrifugally from heat-resistant steels and alloys
TU 1333-094-00220302-2005 Pipes centrifugally from corrosion and heat resistant steels and alloys for high temperature reaction tube furnaces petrochemical equipment
TU 1333-095-00220302-2005 reaction tubes of corrosion-resistant and heat-resistant steels and alloys for high-temperature tube furnaces petrochemical equipment
TU 1333-111-00220302-2006 pipes of centrifugally cast heat-resistant and heat-resistant steels and alloys for high temperature tube furnaces
TU 1333-147-00220302-2009 pipes of centrifugally cast heat-resistant alloys and sverhzharoprochnyh for high-temperature tube furnaces
TU 1333-159-00220302-2011 pipes of centrifugally cast heat-resistant and heat-resistant steels and alloys for high temperature equipment refining and petrochemical industries
TU 1333-172-00220302/31-2012 pipes of centrifugally cast heat-resistant and heat-resistant steels and alloys for high temperature equipment petrochemical and gas processing industries
TU 1468-099-00220302-2005 Taps Stamped from heat-resistant and corrosion-resistant steels and alloys up to PN 10 N / mm ²
TU 1882-174-00220302-2013 corrosion-resistant sheet steel double layer and three-layer made by explosion welding
TU 26-02-5475-94 Pipes centrifugally from heat-resistant steels and alloys
TU 26-02-5476-93 castings molded from heat resisting steels for furnace coils petrochemical equipment
TU 3689-112-00220302-2006 reaction tubes of heat-resistant and heat-resistant steels and alloys for high temperature tube furnaces
TU 3689-145-00220302-2009 reaction tubes of heat-resistant steels and alloys for high temperature tube furnaces (instead of TU 1333-093-00220302-2005)
TU 3689-160-00220302-2011 Pipes and reactionary elements of the heat-resistant and heat-resistant steels and alloys for high temperature equipment refining and petrochemical industries
TU 3689-173-00220302/31-2012 Pipes and reactionary elements of the heat-resistant and heat-resistant steels and alloys for high temperature equipment petrochemical and gas processing industries
TU 4112-077-00220302-2003 shaped castings of heat-resistant steels and alloys for the reaction tube furnaces
TU 4112-084-00220302-2004 shaped castings of high-alloy steels and alloys for the reaction coil tube furnaces
TU 4112-108-00220302-2006 castings molded from heat-resistant and heat-resistant steels and alloys for heating and heat exchange equipment petrochemical production
TU 4112-155-00220302-2010 shaped castings of heat-resistant steels and alloys for high temperature tube furnaces
RD 0002-001-00220302/31-2011 Causes and reason codes changes. Guidance document on standardization. Design documentation	Activated 11.01.2011
RD 3689-001-00220302/31-2004 radiant tubes and components for the reaction tube furnaces. Requirements for the design, manufacture and supply (2nd ed. 2008)
RD 3689-002-00220302/31-2008 Welding pipes and radiant elements for reaction tube furnaces (completed and processed)
STO 00220302-001-2009 Guidelines for control of technical condition and residual life assessment of the reaction tubes tube furnaces
STO 00220302-002-2011 Guidelines for control of technical condition and residual life assessment coil tube furnaces
STO 00220302-003-2011 Supervision of the development and production of high-temperature tube furnaces equipment
STO 00220302-006-2013 Guidelines for control of technical condition and life assessment (planned, residual) and outboard bearing support elements disposed in the interior of tube furnaces

RDI Work Scope :

Process engineering of gas industry facilities:

1) field facilities relating to development of gas and oil and gas condensate fields;

2) main gas pipelines and underground storages for gas, oil, gas condensate and products of their processing;

3) plants and separate units for processing of natural gas, oil, gas condensate and associated products;

4) gas fuel supply facilities designed for 1.2 МPa (max.) pressure intended for enterprises and settlements;

5) automotive filling stations using liquefied, compressed hydrocarbon gases and oil products as motor fuel.

Development of urban design documentation
Аrchitectural engineering
Civil engineering
Design of utility networks and engineering systems:

1) heating, ventilation, conditioning;

2) water supply, drainage;

3) heat and gas supply;

4) cold supply;

5) electric power supply up to35 kV, electric lighting and heating;

6) automation and instrumentation;

7) communication, radio, television;

8) mechanization and transport (interurban and intra-site).

Development of project special parts including environmental protection, corrosion protection of building structures, engineering and technical provisions for population defence, production and plant management, construction work mobilization, estimate documentation.
Project engineering including development of investment intents and technical justifications of construction, receipt and preparation of initial data for designing, technical support of projects and construction field supervision.
Engineering-geodetic, engineering-geological, engineering-hydrometeorological, engineering-ecological survey